Industrial Water Treatment Equipment Manufacturers — CE & ISO 9001 Certified; ASME Available on Request
As a certified water treatment equipment manufacturer in Qingdao, we design and export industrial water treatment equipment to procurement managers, distributors, and EPC contractors across Southeast Asia, the Middle East, Africa, South America, and Central Asia. Tell us your water source type, required flow rate, and application, and we will confirm the appropriate system configuration.
Equipment Coverage Across the Full Water Treatment Process Chain
We supply reverse osmosis systems, water softeners, pre-treatment filtration, sterilization and disinfection equipment, wastewater treatment equipment, parts and accessories, and water storage and supply systems from one certified manufacturing base holding CE, ISO 9001, and ASME certifications. When we review a multi-stage inquiry, our engineering team assesses the full process chain as a single configuration sequence: pre-treatment load against membrane or softener requirements, followed by sterilization and storage sizing. Each upstream stage directly affects the specification for the next, so sourcing pre-treatment, membrane, and storage equipment from separate industrial water treatment systems manufacturers can create gaps in flow capacity, pressure rating, or material compatibility before production commitment is made.
RO Membrane Systems
Reverse osmosis membrane systems for high-purity process water, drinking water, and industrial feed-water applications, sized and configured to your source water chemistry and target permeate quality.
industrial reverse osmosis machine
Water Softener Systems
Ion exchange water softeners for boiler feed, cooling tower makeup, and process water lines where calcium and magnesium hardness must be reduced to a defined level before downstream use or further treatment.
industrial water softener systems
Water Filters & Pre-Treatment
Sand filters, carbon filters, and multimedia pre-treatment units that reduce suspended solids, free chlorine, and organic load before the water reaches downstream membrane systems or softener resin beds.
industrial water treatment equipment
Sterilization & Disinfection
UV sterilization, ozone generation, and chemical dosing equipment for drinking water, food and beverage, pharmaceutical, and municipal applications where a defined microbial reduction target is a specified requirement.
water disinfection system
Water Treatment Parts & Accessories
Replacement RO membranes, filter cartridges, high-pressure pumps, control valves, chemical dosing systems, and installation accessories for maintenance supply, system upgrades, and ongoing operation support.
water treatment parts and accessories
Water Storage Tanks & Supply
Pressurized storage tanks, buffer tanks, and water supply systems that integrate with treatment output to manage flow buffering, pressure stability, and supply continuity for process and distribution requirements.
water storage tanks supplyInquiry Routing by Source Water Type, Application, and Output Target
As water filtration equipment manufacturers with a certified production base in Qingdao, we configure each system to match your source water profile and output target. Before selecting equipment, our engineers review your water analysis report, daily flow requirement, and application type to confirm which treatment stages apply and in what sequence. Select your industry below.
Hiju — Water Treatment Equipment Suppliers Delivering to 20+ Countries
Each project below is a confirmed delivery: source water profile, client challenge, system configured, and buyer feedback on record. Export documentation, freight packaging, and OEM-labelling scope are confirmed at order review stage.
Skid-mounted BWRO with Pre-treatment — Food Processing Plant, Vietnam
Client Challenge
The buyer drew from a municipal supply at 430–480 mg/L TDS with variable turbidity peaking above 15 NTU during wet season. Two previous locally-sourced RO systems had experienced membrane fouling within 90 days — both lacking adequate pre-treatment. The client required consistent permeate at or below 10 mg/L TDS sustained over a full production year without membrane replacement.
System Configured & Delivered
After reviewing the water analysis and 8 m³/h output requirement, we configured: multimedia sand filter → 5 μm cartridge → single-pass BWRO at 75% recovery. Factory-assembled, pressure-tested, and flushed before crating. Shipped in one 20 ft container with CE declaration, mechanical and electrical drawings, and a commissioning guide. Lead time: 28 working days.
“The system arrived pre-assembled and pressure-tested. Our technician commissioned it in less than two days. We have been running it for eight months with no fouling issues and permeate quality consistently at 8–9 mg/L TDS.”
— Procurement Manager, Food & Beverage Plant, Ho Chi Minh City, Vietnam
Duplex Ion Exchange Softener — Industrial Steam Boiler Line, Saudi Arabia
Client Challenge
Source hardness measured consistently at 300–340 mg/L as CaCO₃. Scale accumulated on heat-transfer surfaces within six weeks of each manual descaling cycle, cutting boiler efficiency and increasing downtime. The client required outlet hardness reliably below 5 mg/L and continuous boiler feed — switchable to regeneration mode without interrupting supply — operable by a single non-specialist operator.
System Configured & Delivered
Duplex parallel-valve ion exchange softener with time-clock regeneration: one vessel in service while the second regenerates, guaranteeing uninterrupted feed at 5 m³/h. Vessel sizing confirmed for a minimum 48-hour service cycle. OEM-labelled to distributor specification; shipped with regeneration manual, brine startup guide, and initial food-grade salt supply. Outlet hardness verified at 0–2 mg/L in factory test before release.
“Ten months with zero scaling incidents and no unplanned boiler maintenance. Regeneration is automatic and the documentation covered everything — our local engineer did not need to contact Hiju once after installation.”
— Technical Director, Industrial Manufacturing & Packaging Plant, Dammam, Saudi Arabia
28 Engineers and 78 Technicians in a 21,000 sqm Workshop
We have been manufacturing and exporting water treatment equipment since 2016, operating from a 70,500 sqm facility in Qingdao that includes a 21,000 sqm production workshop. Our production lines cover process water purification, pre-treatment filtration, and wastewater treatment equipment for industrial reuse and discharge applications. We hold CE and ISO 9001 certifications; ASME documentation is available on request depending on product type and destination. As a water treatment plant manufacturer focused on export, our engineering team includes 28 engineers who manage system selection, configuration review, and technical documentation, supported by 78 production technicians responsible for fabrication, assembly, and quality inspection.
When a buyer submits an inquiry that includes a water analysis report and a defined daily output target, our engineers check source TDS, hardness, suspended-solids load, flow requirement, and destination electrical standards before confirming whether a standard unit or a customized configuration applies. We do not issue a system recommendation without this review; inquiries that arrive without source water data usually require an additional technical exchange before any meaningful configuration can be generated, and we ask for it upfront to avoid that delay; for our full manufacturing and engineering background, see our About Hiju page.
Water Quality Review
Source water type, TDS, hardness, suspended solids, and application requirements reviewed before any system configuration is proposed.
Process Selection
Treatment route confirmed to source water analysis: pre-treatment stage, primary treatment, and post-treatment sequence aligned to output target.
Component Confirmation
Membranes, vessels, pumps, valves, and controls specified to confirmed source conditions, daily volume, and destination electrical standards.
Factory Assembly
System fabricated, assembled, and pressure-tested in our 21,000 sqm production workshop, with inspection records prepared before release.
Export Packaging
Sea-freight-ready crating, foam protection, packing lists, and CE documentation or inspection certificates prepared to destination-market requirements.
After-Sales Support
Commissioning guidance, replacement part supply, and engineering support available after delivery, coordinated through the same technical team that reviewed the inquiry.
Custom production on a confirmed technical brief.
OEM orders: buyer provides branding and an agreed system configuration. ODM orders: buyer’s performance target or design requirement calls for adaptation from our standard range. Both require a completed brief before production scope & pricing can be confirmed.
Buyer supplies branding, label artwork, system spec & documentation format. We manufacture & ship under your brand.
↳ Required Brief Inputs
- —Panel branding artwork & label specifications
- —Confirmed system configuration / model number scheme
- —Target market electrical standards (110V / 220V / 380V · 50/60 Hz)
- —Packaging format and documentation needs
- —Certification scope required for destination market
Buyer brings performance target; our engineers design from standard range outward — full process configuration, components & controls.
↳ Required Brief Inputs
- —Water source type & full analysis report
- —Target daily output volume / m³·h / m³·d
- —Output water quality target (TDS / μS·cm / standard)
- —Site footprint, ambient temperature, voltage
- —Labeling, packaging & certification needs
Talk to Hiju About Your Water Treatment Project
Tell us your water source type, required daily output volume, intended application, and site location. Our engineering team reviews each inquiry against source water conditions and applicable certification requirements before confirming the system configuration.
- Water source type — municipal supply, groundwater, surface water, brackish water, or seawater
- Required daily output volume or peak flow rate
- Intended application — industrial process, drinking water, boiler feed, F&B, pharma/electronics, or municipal supply
- Destination country and electrical standards (110V / 220V / 380V; 50/60 Hz)
- Water analysis report — TDS, hardness, turbidity, iron, chlorine if available
- Branding, documentation, and certification requirements
Final compliance must be confirmed against the user’s process specification, validation protocol, and applicable local standard.
Latest Articles from Hiju Water Treatment
Equipment selection notes, export application cases, and product updates — published as new information becomes relevant to buyers.
